Software solutions
134,2 kHz
GIS TS-W3x Animal, GIS TS-W38 HDX-Programmer, GIS TS-W38 Waste-Programmer, GIS TS-R3x ReaderSetup
Programming software for all GIS Animal programmers in the
TS-W3x, TS-W8x, TS-W6x II and TS-W21 series (134.2 kHz)
TS-W3x Animal Programmer
The programme writes and reads Animal transponders with ISO NORM 11784.
The writing is for the transponder types:
FDX-B: Hitag2, HitagS, Hitagµ, EM4305, EM4569, Q5, ATA5575 M2, ATA5577 and SIC7888
HDX: TMS37124, TMS37190 (both from Texas Instruments), NCD1015, SIC7900 and SIC7999
FDX-A: Q5, ATA5575 M2, ATA5577, EM4305 V512 and SIC7888 possible.
Version 4.26 | 29.06.2022 | 3,19 MB | german / english
Programming software for HDX programmer of the TS-RW38 AC series (134,2 kHz)
TS-W38 HDX Programmer
The programme writes and reads HDX transponders with consecutive numbers or a fixed data range. The following HDX transponder types are supported: TMS37124, TMS37190 (both from Texas Instruments), NCD1015, SIC7900 and SIC7999.
Version 1.11 | 28.06.2022 | 2,64 MB | german / english
Programming software for the TS-RW38 AC series waste programmer (134,2 kHz)
TS-W38 Waste Programmer
The programme writes and reads waste transponders in accordance with the EN14803 specification.
The following transponder types can be used for programming: Hitag 2, Hitag S, Hitag µ, EM4305, ATA5555 (Q5), ATA5577, ATA5575M2, SIC7888, TMS37124, NCD1015, SIC7900, SIC7999.
Version 1.10 | 01.07.2022 | 2,76 MB | german / english
Setting software for the TS-R3x, TS-R6x II and TS-R21 series readers (134,2 kHz)
TS-R3x ReaderSetup
This programme can be used to set the TS-R3x, TS-R6x II and TS-R21 to a desired character string. The software can programme USB, USB-HID, USB COM port emulation, Ethernet and RS232 devices. The program automatically recognises which device is connected.
Version 5.15 | 21.06.2023 | 3,20 MB | german / english