Software solutions
125 kHz
GiS TS-R3x ReaderSetup, GiS TS-R3x-ReaderSetupPS2, GiS TS-W3x Programmer Setup, GiS TS-W38 AutoWriter, GiS GiS TS-W38 FSK-Programmer, GiS TS-R64 TC-ST
Setting software for the TS-R3x, TS-R6x II and TS-R21 (125 kHz) series readers
TS-R3x ReaderSetup
This programme can be used to set the TS-R3x, TS-R6x II and TS-R21 to a desired character string. The software can programme USB, USB-HID, USB COM port emulation, Ethernet and RS232 devices. The program automatically recognises which device is connected.
Version 5.16 | 03.05.2024 | 3,16 MB | german / english
TS-R3x ReaderSetupPS2
This programme can be used to set the TS-R34 and TS-RW34 to a desired character string.
The software can only programme PS2 devices.
Version 1.00 | 25.11.2010 | 879 kB | german / english
Programming software for all GIS programmers in the TS-W3x, TS-W6x II andTS-W21 (125 kHz) series
TS-W3x Programmer
The program writes and reads transponders of the following types:
Unique, Hitag1, Hitag2, HitagS, Hitagµ, Q5, Titan EM4305, EM4569, ATA5575 and ATA5577.
Suitable transponders can be read and written in “Unique Format”.
The programmer automatically recognises which device type is available.
The transponder types that can be processed with the reading and writing device are automatically displayed as active. Transponder types that cannot be processed are greyed out.
Version 6.13 | 03.05.2024 | 4,80 MB | german / english
TS-W38 AutoWriter
This programme simplifies the writing of different transponders with numbers or fixed data ranges.
Version 1.03 | 26.01.2024 | 2,72 MB | german / english
Programming software for reading and writing FSK transponders.
TS-W38 FSK programmer
This programme can be used to read out and programme FSK transponders with different encodings. The following transponder types can be used for FSK programming:
ATA5555 (Q5), ATA5575 M2, ATA5577, SIC7888.
Version 1.09 | 30.06.2022 | 2,61 MB | german / english
Setting and programming software for the TS-R64 TC and TS-R64 ST devices (125 kHz)
TS-R64 TC-ST
This programme can be used to configure the TS-R64 TC or TS-R64 ST and to read out and save existing data records.
Version 1.03 | 18.05.2009 | 1,30 MB | german / english