GiS mbH
Höllochstraße 1
D - 73252 Lenningen
Tel: +49 (0) 7026 - 606 - 0
Fax: +49 (0) 7026 - 606 - 66
e-mail: rfid@gis-net.de
Setup software for GiS Reader series
TS-HR3x, TS-HR9x, TS-HML13x and TS-HMK13x (13,56 MHz)
TS-HRW ReaderSetup
With this program you can set up the TS-HR3x, TS-HR9x, TS-HML13x and TS-HMK13x reader to the desired string.
The software can program USB, USB-HID, USB COM-Port Emulation, Ethernet and RS232 devices.
The program automatically recognizes which device is connected.
Version 2.13 | 02.02.2023 | 3,21 | deutsch / english
Programmer software for all GiS Programmer Series
TS-HW3x, TS-HW9x, TS-HMK13x and TS-HMK13x (13,56 MHz)
TS-HRW Programmer
This program writes and reads transponders in ISO NORM 15693 (My-D, ICode SL2, Tag-it HF-I)
and MIFARE Ultralight® and MIFARE® Classic (1K / 4K) Transponder.
Version 2.12 | 08.02.2023 | 3,20 MB | deutsch / english
TS-HRW AutoWriter
This program eases writing of ISO 15693 Transponders with serial numbers or fixed data areas.
Version 1.16 | 24.11.2022 | 2,73 MB | deutsch / english
Programming software for DESFire® Transponder, only for the TS-HRW38 series devices
TS-HRW DESFireProgrammer
To use the "GiS TS-HRW DESFireProgrammer" software a TS-HRW38 device is needed.
Using the application you can read data from and write data to DESFire® Transponder in a comfortable way.
Version 1.04 | 24.06.2022 | 3,39 MB | deutsch / english
TS-HRW DESFire AutoWriter
To use the "GiS TS-HRW DESFire AutoWriter" software a TS-HRW38 device is needed.
This software eases writing of DESFire® Transponders with numbers or fixed data areas.
Version 1.03 | 08.11.2022 | 2,76 MB | deutsch / english
Programming software for MIFARE® Transponder, only for the TS-HRW38 series devices
TS-HRW Programmer
This program writes and reads transponders in ISO NORM 15693 (My-D, ICode SL2, Tag-it HF-I)
and MIFARE Ultralight® and MIFARE® Classic (1K / 4K) Transponder.
Version 2.12 | 08.02.2023 | 3,20 MB | deutsch / english
GiS TS-HRW Mifare AutoWriter
To use the "GiS TS-HRW MIFARE AutoWriter" software a TS-HRW38 device is needed.
This software eases writing of Mifare MIFARE® Transponders with numbers or fixed data areas.
Version 1.04 | 24.06.2022 | 2,68 MB | deutsch / english
Programming software for NFC Transponder, only for the TS-HRW38 series devices
TS-NFC Programmer
To use the "GiS TS-NFC Programmer" software, a TS-HRW38 with Firmware version 1.19 or higher
and a Programmers license is needed!
Version 1.09 | 24.06.2022 | 3,45 MB | deutsch / english