GiS mbH
Höllochstraße 1
D - 73252 Lenningen
Tel: +49 (0) 7026 - 606 - 0
Fax: +49 (0) 7026 - 606 - 66
e-mail: rfid@gis-net.de
Setup software for GiS Reader series TS-R3x, TS-R6x II and TS-R21 (125 kHz)
TS-R3x ReaderSetup
With this program you can set up the TS-R3x, TS-R6x II or TS-R21 to the desired string.
The software can program USB, USB-HID, USB COM-Port Emulation, Ethernet and RS232 devices.
The program automatically recognizes which device is connected.
Version 5.15 | 21.06.2023 | 3,20 MB | deutsch / english
TS-R3x ReaderSetupPS2
With this program you can set up the TS-R34 and TS-RW34 to the desired string.
The software can program only PS2 devices.
Version 1.00 | 25.11.2010 | 879 kB | deutsch / english
Programmer software for GiS Programmer series TS-W3x, TS-W6x II and TS-W21 (125 kHz)
TS-W3x Programmer
This program writes and reads transponders of
Unique, Hitag1, Hitag2, HitagS, Hitagµ, Q5, Titan, EM4305, EM4569, ATA5575 and ATA5577 types.
Qualified transponders can be read and written in „Unique Format“.
The programmer automatically recognizes which device is connected.
The transponder types, which are useable with the read/write device are automatically activated.
Transponder types which are not useable are grayed out.
Version 6.12 | 22.06.2023 | 4,84 MB | deutsch / english
TS-W38 AutoWriter
This software eases writing of different Transponders with numbers or fixed data areas.
Version 1.03 | 26.01.2024 | 2,72 MB | deutsch / english
Programmer software to reads and writes FSK transponder.
TS-W38 FSK-Programmer
The program reads and writes FSK transponder with different coding.
For FSK programming the following transponder types can be used:
ATA5555 (Q5), ATA5575 M2, ATA5577, SIC7888.
Version 1.09 | 30.06.2022 | 2,61 MB | deutsch / english
Configuration and Programmer software for devices TS-R64 TC and TS-R64 ST (125 kHz)
TS-R64 TC-ST
The program configure the TS-R64 TC or TS-R64 ST. You can read and safe data records.
Version 1.03 | 18.05.2009 | 1,30 MB | deutsch / english