GiS mbH
Höllochstraße 1
D - 73252 Lenningen
Tel: +49 (0) 7026 - 606 - 0
Fax: +49 (0) 7026 - 606 - 66
e-mail: rfid@gis-net.de
The TS-HRW38Plus is a compact
read-/write module with internal antenna to read or program nearly all known 13,56 MHz transponder using ISO15693 or ISO 14443-3.
The module uses an additional SAM = "Secure Access Module" for extended security and cryptography.
Through the integration of the SAM in the reader device the complete key
management is inside of the device and allows a very high security standard.
The following transponder types are supported:
ISO 15693, ISO 14443-3, MIFARE® DESFire®, MIFARE Ultralight®, MIFARE® Classic
(1K / 4K)
There are four different interfaces available.
- USB HID Interface
- USB COM Port emulation
- Ethernet Interface
no parity, no protocol)
Optionally, the system can be equipped with a relay contact, buzzer or base plate.
Size: | 80 * 80 * 28 mm |
Size with base plate: | 100 * 80 * 31 mm |
Reading distance: | up to 100 mm (depending on transponder size) |
Frequency: | 13,56 MHz |
Operation temperature: | -10°C to 55°C |
Power supply: | USB over USB Interface Ethernet or RS232 with ext. 5 Vdc |
Interfaces: | USB-HID, Ethernet or RS232 |
Baudrate (only RS232): | 19200, others possible |
Input / Output (optional): | Relay contact, Sensor input TTL, Buzzer |
Transponder types: | ISO 15693, ISO 14443-3, MIFARE® DESFire®, MIFARE Ultralight®, MIFARE® Classic (1K / 4K) |
Article number | Name | Interface |
TS-HR38Plus- USB |
13,56 MHz RFID-Reader | USB-HID/COM |
TS-HRW38Plus- USB |
13,56 MHz RFID-Reader & Programmer system | USB-HID/COM |
TS-HR38Plus- Ethernet |
13,56 MHz RFID-Reader | Ethernet |
TS-HRW38Plus- Ethernet |
13,56 MHz RFID-Reader & Programmer system | Ethernet |
TS-HR38Plus- RS232 |
13,56 MHz RFID-Reader | RS232 |
TS-HRW38Plus- RS232 |
13,56 MHz RFID-Reader & Programmer system | RS232 |
All systems are also available as OEM modules! |